Creative Elements

Hi!

When I took a look at this week's colour challenge at Just Add Ink my first thought was 'yuck'!  Cherry Cobbler, Blushing Bride and a Neutral did not seem at all like a winning combination.  I must give my hat to the girls though - it's now a colour combo I love!

I started off with a base of Blushing Bride DSP from the Nursery Nest pack and then overstamped it in Cherry Cobbler.  In the photo below you can just see that I also stamped the edge stamp in Blushing Bride, just below the ribbon under the sentiment.

I kept the inside very much the same as the outside.

I think colour combinations like this, that at first seem to be a bit unappealing, are great as long as you follow the 60:30:10 rule.  In this case 60% of my card was Blushing Bride, 30% was Cherry Cobbler and 10% was Whisper White.

Stamps: Creative Elements, Clearly For You, Happiest Birthday Wishes (hostess)
Ink: Cherry Cobbler, Blushing Bride
DSP/Cardstock: Nursery Nest DSP, Cherry Cobbler, Blushing Bride, Whisper White
Other: Cherry Cobbler Seam Binding Ribbbon, Paper Snips, Corner Rounder Punch

Catch you later,

Tina

Baby Tees in Blue

Hi!

Today's card was one I was asked to make by a friend.  She needed a card to give to parents who had just had a baby boy.  I had just received my Baby Tee's Jumbo Stampin' Around wheel, so it was perfect timing all round!

I used the new Nursery Nest DSP for the card.  The Marina Mist and Pear Pizzazz stripes are super cute for a baby boy card.

I stamped the Baby Tees image twice, and coloured and cut out the second image to pop on dimensionals over the first image.

I used a 'spare' baby tee to dress up the inside of the card.

Stamps: Baby Tees Jumbo Stampin' Around wheel, A Word For You
Ink: Marina Mist, So Saffron
DSP/Cardstock: Nursery Nest DSP, Marina Mist, Whisper White
Other: Big Shot, Timeless Type Alphabet Dies, Marina Mist Satin Ribbon, Blender Pen, Paper Snips, Dimensionals

Catch you later,

Tina

A Very Cute CASE

Hi!

In the papercraft world CASE stands for Copy And Share Everything.  I love that papercrafters are so willing to share their wonderful creations - there are so many blogs out there with inspirational creations!  Today's card is a CASE of a card I found one night while blog surfing and I was so inspired by the card I made two.  One was for Hudson's birthday and the second was for one of Hudson's little friends who was also celebrating a birthday.  You can see the original card over at Add Ink and Stamp.

Here is the card I made for Hudson:

A different angle!

And the matching card I made for his little mate.

Another look!

I stamped the insides of both cards the same.

Aren't they cute cards!

Stamps: Fox and Friends, It's Your Day, Curly Cute

Ink: Baja Breeze, So Saffron, Early Espresso

DSP/Cardstock: Just Add Cake DSP, Baja Breeze, Early Espresso, Whisper White, So Saffron

Other: Curly Label Punch, Circle Punches, Modern Label Punch, Word Window Punch, Dimensionals, White Brads

Catch you later,

Tina

Just Believe in Island Indigo

Hi!

This week at Just Add Ink we were challenged to use a sketch to inspire our creations.  I needed to make a get well card so I decided to use the sketch.

The oval panel was brayered using Island Indigo, Pool Party and Lucky Limeade inks.  It was actually a leftover piece from another project but I thought it would work pretty well with the card I wanted to make.

The inside I made fairly simple.

And of course I didn't realise until AFTER I'd written on the card and sealed it that I hadn't stamped the greeting completely.  That fact got discovered in the editing process.  Oh well... it is hand stamped and unique I guess!

Stamps: Just Believe, Trendy Trees, Thoughts and Prayers

Ink: Island Indigo, Pool Party, Lucky Limeade, Basic Black

DSP/Cardstock: 2011-2013 In Colour Patterns DSP, Basic Black, Island Indigo, Whisper White

Other: In Colour Ruffled Ribbon, Lace Ribbon Border Punch, Brayer, Oval Cutter (non SU)

Catch you later,

Tina

Big Shot Blog Hop

Hi!

Welcome to another little blog hop.  Today the ladies that are participating all have projects they made using the Big Shot.  The blog before mine was Ros Davidson's, but it's all a big loop so it doesn't matter where you start.  Just keep hopping 'til you get to where you started!

I have a layout for you today that uses several accessories for the Big Shot.

You can see I used the Timeless Type Alphabet Dies, the Scribbles Swirls die and the Tasteful Trims Die.  Did you notice the scalloped border around the layout?  I'll show you how to make the border in one piece a bit further down, but first a few more closer shots of the layout.

The "she's a mini" part of the title was printed onto Whisper White cardstock and trimmed.  I used RGB codes to change the colour of the font to Wild Wasabi to match the rest of the layout.

I used some Glimmer brads in the title and also as the centre of the flowers.

The flowers were brayered with Perfect Plum ink and then spritzed with Frost White Shimmer paint.

OK, so now on to how I made the border piece.  Firstly I cut a 1" wide border.  To do this you line your cardstock up at the 1" mark, put your blade at 1" and cut down to 11".  Turn your cardstock 90 degrees and repeat for all 4 sides.  You end up with a shape like this:

Now you need to fold the frame in half diagonally to get this shape:

After each fold burnish with a bone folder.  The flatter the folds the easier it is to line up the piece on the die.  You need to fold your frame diagonally again to end up with a shape like this:

Now you need to place the cardstock on the die.  You shouldn't have any troubles cutting through all layers at once.  It's very hard to see in the photo, but I lined the top edge up with the top cutting edge of the die and then centered the piece on the scallops at the bottom.  You can see the shape of the corner pieces in the first photo.  It's a bit of a flattened scallop.  I haven't tried it yet, but I THINK if you want a more rounded scallop at the corners you would have to arrange your cardstock the other way.  That is, line up the bottom edge of the cardstock on the scalloped edge so that the points of your cardstock extend the full length of the scallops.  Your frame would end up a little narrower than mine.  It's all just a matter of playing around with it to see what you like!

When you have cut it and unfolded it, this is what you end up with:

A continuous, scalloped frame!  You will probably need to smooth out the folds at the corners with your bone folder.  I reckon you could make almost any sized frames using my method, you'd just have to play with the measurements of the frame you cut.  The rest of the steps would be the same.  If you have any questions, just leave a comment and I will get back to you.

Ink: Perfect Plum

Cardstock: 12 x 12 Textured Whisper White, Perfect Plum, Wild Wasabi, Whisper White

Big Shot: Timeless Type Alphabet Dies, Tasteful Trims Die, Scribbles Swirls Die

Other: Silver Foil Smooch, Frost White Shimmer Paint, Paper Daisies, Basic Jewel Rhinestones, Brayer, Glimmer Brads, Dimensionals, Letter Gothic Standard Font

Thanks for looking at my layout.  You're off to Nikki Sadler's blog now, where I'm sure you're in for a real treat!

Catch you later,

Tina

Blogs in the hop:

Ros Davidson

http://www.rosdavidson.typepad.com/

Nikki Sadler
http://www.inkyart.com.au/

Sue Madex
http://www.madexcreations.com/

Kathryn Ruddick
http://www.katlodesigns.com/

Judy May
http://www.judymay.typepad.com/

Happy Birthday Shelli!

Hi

Today's card was one I made for a very special lady.  The founder of Stampin' Up!, Shelli Gardner, turned 50 this week.  As a surprise for her we were all asked to make a birthday card to send to her that would be presented to her in a big box full of everyone's cards.  I based my card on this card.

I had to keep it relatively flat for postage to the USA, so I didn't tie a bow in the ribbon and I only popped one layer up on Dimensionals.

I stamped the flower, colouring it with my markers to get a multi coloured effect.  I then stamped the large image in the stamp set over the top in Versamark Ink and clear embossed it.  You can see the shine from the embossing in the photo above.

I kept the inside fairly simple, just a sentiment and a little flower stamp to match the background I stamped on the front of the card.

Stamps: Clearly For You, A Word For You
Ink: Riding Hood Red, Old Olive, Versamark
Cardstock: Riding Hood Red, Whisper White
Other: Clear Embossing Powder, Whisper White Organza Ribbon, Dimensionals, Small Oval Punch (retired)

Don't forget Saturday's Big Shot Blog Hop!

Catch you later,

Tina

Well Scripted and Well Worn Birthday

Hi!

Back again with another grungy male birthday card.  I actually made this one before the other one, but forgot about blogging it until I looked through my 'To Blog' folder.

I CASED my card from Teneale Williams.  You can find her original card here.  Mine is a simplified version - Teneale adds such wonderful little detail that I just didn't have time to include.

I just carried the theme through to the inside, using the same ribbon and DSP as the front.

Stamps: Well Scripted (retired)

Ink: Cajun Craze, Early Espresso

DSP/Cardstock: Well Worn DSP, Cajun Craze, River Rock

Other: Artichoke Denim Ribbon, Sponge Daubers, Chipboard numbers (non SU)

Catch you later - don't forget the Big Shot Blog Hop on Saturday!

Tina